Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: peddi on August 30, 2008, 02:12:20 AM

Title: My 1st robot...
Post by: peddi on August 30, 2008, 02:12:20 AM
hi again !
many mounths ago i made a topic like this but i could find it now !
because i wasnt here for a long time and cause of many reasons i couldnt continue my work on my robot,now i want to resume it and i should say that my time is short  and i really need your help.
ok now i say that what kind of robot i want to build.
i want a robofire.i mean a robot with ability to find and turn off the fire.
ok as my 1st step i want to know that what kind of senor should i use and about its circuit schematic.
for example can i use infrared LEDs??? can some body give me its schmatic?
thank you all...
Title: Re: My 1st robot...
Post by: RobD on August 31, 2008, 09:54:05 AM

Quote
...for example can i use infrared LEDs??? can some body give me its schmatic?

http://www.societyofrobots.com/schematics_infraredemitdet.shtml (http://www.societyofrobots.com/schematics_infraredemitdet.shtml)

The tutorials on this website are very good.   ;)
Title: Re: My 1st robot...
Post by: stan on August 31, 2008, 09:57:06 AM
go to search type peddi and the click on the first message and all the reply will be there from you march posting.  ;)
Title: Re: My 1st robot...
Post by: Admin on September 04, 2008, 07:18:26 PM
Quote
many mounths ago i made a topic like this but i could find it now !
Took me like 5 seconds to find it ;D
http://www.societyofrobots.com/robotforum/index.php?topic=3546.msg26927#msg26927
Title: Re: My 1st robot...
Post by: peddi on September 06, 2008, 05:09:24 AM
thnak u
um noe i have a question,can i change that IR with a heat sensore like PTC or NTC??
and also i want another thing,can some body gimme the schematic of my motors circuit? i have two 12V,DC motors,how should i run em?
and...
THERE ISNT ANY BODY HERE WITH EXPERIENCE IN THIS FIELD?I MEAN NOONE HEAR DIDNT WORK ON FIRE ROBOTS???U DONT KNOW ONE? :)
Title: Re: My 1st robot...
Post by: Admin on September 06, 2008, 09:38:48 AM
Quote
can i change that IR with a heat sensore like PTC or NTC??
Depends on the sensor. Look at the datasheet and see what the output is.

Quote
can some body gimme the schematic of my motors circuit?
Search for motor driver and H-bridge. I personally recommend buying one, not making one.
http://www.societyofrobots.com/robot_parts_list_electronics.shtml
Title: Re: My 1st robot...
Post by: peddi on September 08, 2008, 02:17:34 AM
tnx mate but.... i dont know anything about motor and motor drivers.
can u tell me more.i couldnt find smth useable from the site  :(
Title: Re: My 1st robot...
Post by: pomprocker on September 08, 2008, 10:12:45 AM
No offense, but Admin or anyone else on this site won't be able to make advancements in robots if we spend all our time answering the same questions over and over again.

Search the forum, search the site index, search google, then come back and ask specific questions.
Title: Re: My 1st robot...
Post by: TrickyNekro on September 09, 2008, 10:06:09 AM
No offense, but Admin or anyone else on this site won't be able to make advancements in robots if we spend all our time answering the same questions over and over again.

Search the forum, search the site index, search google, then come back and ask specific questions.

Right... we are here to help you out with your troubles...
But we are not going to do babysitting.... no offense pal...
Title: Re: My 1st robot...
Post by: peddi on September 10, 2008, 11:01:50 AM
ha ha ha !!!
thank u all !
now , i think u can close the forum and put a link for search everywhere !!!
whtz the use of thi sforum? huh?!
Title: Re: My 1st robot...
Post by: Rebelgium on September 10, 2008, 11:55:26 AM
The use is to answer good questions. Not questions that we have answerred 1000 times already...

ALL of your questions can be easily answerred by just searching the forum and reading the FAQ and tutorials.
We always stayed polite. If you can't, then please f off.
Title: Re: My 1st robot...
Post by: Admin on September 15, 2008, 03:44:41 PM
Hey no flaming everyone. Seriously.

The point of the forum is to help you when you are stuck, and/or when the web doesn't have answers . . . Remember, I am helping you and 2500 other members in the forum. I sacrifice hours every day helping out on SoR without anyone paying me for it. I request everyone to spend at least 20 minutes thinking and searching before asking questions.

Besides, if you don't research the question first, it might make you look dumb if you ask something totally obvious :P

6 pages of motor driver results on SoR (http://www.societyofrobots.com/robotforum/index.php?action=search2;params=YWR2YW5jZWR8J3wwfCJ8YnJkfCd8MiwzLDQsNSw2fCJ8c2hvd19jb21wbGV0ZXwnfHwifHN1YmplY3Rfb25seXwnfHwifHNvcnR8J3xyZWxldmFuY2V8Inxzb3J0X2RpcnwnfGRlc2N8InxzZWFyY2h8J3xcIm1vdG9yIGRyaXZlclwi)

And 1.4 million motor driver google results (http://www.google.com/search?q=motor+driver).