go away spammer

Author Topic: $50 Robot Schematic  (Read 5591 times)

0 Members and 1 Guest are viewing this topic.

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
$50 Robot Schematic
« on: November 08, 2007, 12:37:22 PM »
I have just got all the components to start the $50 robot schematic. I am going to use a breadboard, and I was wondering if anyone has drawn up a line schematic for the bot. The colored dot schematic is nice, but it left me with a few questions.
-Thanks,
Buk

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #1 on: November 12, 2007, 05:33:34 PM »
OK, so i got off my lazy butt and did it myself. It is a pretty crummy job, i did it in paint. If anyone would take the time to look at it and tell me if i did anything wrong, please give me input!

Thanks,
Buk

Offline maverick monk

  • Robot Overlord
  • ****
  • Posts: 204
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #2 on: November 12, 2007, 07:22:39 PM »
i was just looking for the same exact thing. but i cant read that, and some of the lines just end. anyone with a nice schematic that would post it up, along with info for me to site you as a source for my sciencefair, your help would be greatly apreciated

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #3 on: November 12, 2007, 07:31:35 PM »
Might have to zoom in on it a bit, it got shrunk. I dont think any of the lines "just end", but mebbe im dumb

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: $50 Robot Schematic
« Reply #4 on: November 12, 2007, 07:33:51 PM »
sorry, the forum shrinks images like that . . .

try the direct link to his image:
http://i236.photobucket.com/albums/ff16/robvandiver/50DollarRobotSch.jpg

I didnt check the pin numbers, but the rest looks correct.

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #5 on: November 13, 2007, 02:13:27 PM »
Thanks for taking a look, Admin. I think all the pins are correct, if not I got two chips in case i fry one.  ;D

Offline Rebelgium

  • Supreme Robot
  • *****
  • Posts: 637
  • Helpful? 0
  • It's called the future ... We like it here
    • orgcrime.net
Re: $50 Robot Schematic
« Reply #6 on: November 13, 2007, 04:12:15 PM »
To bad you drew it in paint ... :/
next time you should draw it in EAGLE  :P
 
just some advice  :)
To relax after some hard work on robotics: A very fun free online text based MMORPG
orgcrime.net

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #7 on: November 13, 2007, 07:24:15 PM »
I didnt even know what Eagle was till today when I saw a post about it. Ill dl it when i get home, looks neat.
« Last Edit: November 13, 2007, 08:15:25 PM by bukowski »

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: $50 Robot Schematic
« Reply #8 on: November 13, 2007, 08:20:51 PM »
i use tinycad to do schematics

http://tinycad.sourceforge.net/
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline bukowskiTopic starter

  • Robot Overlord
  • ****
  • Posts: 219
  • Helpful? 0
Re: $50 Robot Schematic
« Reply #9 on: November 14, 2007, 03:54:41 PM »
After reading some of the datasheet for the mega 8 and a couple of related posts, it seems like pin one should be set at a normally high state. Should i tie it in to the requlated voltage to keep my chip from resetting?

Offline HDL_CinC_Dragon

  • Supreme Robot
  • *****
  • Posts: 1,261
  • Helpful? 5
Re: $50 Robot Schematic
« Reply #10 on: November 14, 2007, 05:22:45 PM »
Sorry to interrupt but:
i use tinycad to do schematics

http://tinycad.sourceforge.net/

Only thing though is that it doesnt come with an ATMega8 symbol for the MCU library. I have to make my own XP
United States Marine Corps
Infantry
Returns to society: 2014JAN11

 


Get Your Ad Here