Society of Robots - Robot Forum
Software => Software => Topic started by: avinash on May 10, 2009, 04:09:53 AM
-
Hello Friends,
I have recently written a GUI Software for driving USBasp compatible USB Programmers. It is much easier to use than the avrdude or avrdude-gui.
You can download it free of cost from here
http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/ (http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/)
[size=18]Screen Shots[/size]
(http://www.extremeelectronics.co.in/avrtutorials/images/USB_AVR_Programmer1.jpg)
-
Linux Version is Also here !!!
(http://extremeelectronics.co.in/images/write1.png)
Get it from here
http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/ (http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/)
-
Thanks a million for your software. It works very well and I could successfully program an atmega8 for the 50$ robot. It's much better than avrdude. There is just one extremely small problem in it. ( I wouldn't be saying this if I did not care about making the software better). The program stops working whenever the hex file loads successfully. This happened twice and then I could program my chip. Otherwise, this is an AWesome software and I heartily thank you for posting this on the forum.