Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: Its_Friday on March 23, 2009, 05:38:59 PM
-
Where do i purchase male molex connectors or just the pins themselves?
-
Hi,
In most well assorted electronics shops and where PC modders gets their stuff.
-
how about those small molex pins on microcontrollers?
-
Male ones are called pin headers, molex refers to the female socket.
-
i am having a bit of trouble finding the pin headers similar to those found on the axon microcontroller :/
-
you can buy them at:
www.mouser.com (http://) or
www.digikey.com (http://)
or any similar electronics store.
-
i'm finding it neigh impossible to find 1 1mm pin, or rows of 3 1mm pins>_<
-
i'm finding it neigh impossible to find 1 1mm pin, or rows of 3 1mm pins>_<
You buy a row of 40 and use a plier to snap them off at desired length!
-
i can't even find those:(
-
1mm is not the standard header. Standard headers are 0.1 inches or 2.54 millimeter spacing.
-
silly me, i was measuring the diameter of the pin itself instead of the base xD