Society of Robots - Robot Forum
General Misc => Misc => Topic started by: MaltiK on October 15, 2008, 07:51:58 PM
-
(http://www.adafruit.com/images/large/tvbgonepcb_LRG.jpg)
ODB++ PREFERRED DATA ACCEPTED
GerberX (RS 274-X) PREFERRED DATA ACCEPTED
Gerber
HP-GL
Excellon
Sieb & Meier
DXF
DPF (Barco)
Recommended file names and extensions for those who are not familiar with conventional nomenclatures.
Single sided PCB:
*.top (top layer)
*.ncd (NC Drill file, plated)
*.brd (board outline)
Optional files for single layer:
*.tsk (text top layer)
*.tmk (top solder mask)
*.slt (slot outline)
*.bot (bottom layer)
*.bmk (bottom solder mask)
*.bsk (bottom text layer)
http://www.ladyada.net/images/tvbgone/tvbgone11.png
-
I dont get what you want to do
-
Many PCB makers require that when you request for a PCB to be made, it be in a certain format, and what I want someone to do is make that format using the picture, is this possible?
-
what about the underside of the board
-
Did you get permission to copy that board?
-
Did you get permission to copy that board?
:o
also, eagleCAD is the program used to transfer a schematic( in your case http://www.ladyada.net/images/tvbgone/tvbgone11.png) into a PCB design
-
Did you get permission to copy that board?
As soon as they post it on the internet for all to see I have the right to make my own according to that schematic as long as I am not making a profit :o
And is it possible, anybody with eagle eye CAD program, can make it for me?
-
learn EagleCAD and do it yourself , I highly doubt someone here would make an EagleCAD PCB for someone else for free.
-
Oh I didnt know it was really time consuming, apologies
-
You'll also need the other side of the PCB. Just make another PCB yourself.
-
You'll also need the other side of the PCB. Just make another PCB yourself.
the schematic is here : http://www.ladyada.net/images/tvbgone/tvbgone11.png
-
You'll also need the other side of the PCB. Just make another PCB yourself.
the schematic is here : http://www.ladyada.net/images/tvbgone/tvbgone11.png
Ahhh schematics are sooo confusing, but what better time to learn than now :P