I decided to use just a regular battery holder for the robot. It holds 4 AA batteries which equal to 6 volts. This batteries are not the kind that you can recharge or secondary batteries, they are just the regular 1.5 primary batteries.
So my question is does this mean that I should just follow along with the schematic and tutorial instructions that apply to the RC battery pack or an assembly of batteries equal to 6v or greater?
Or do I need to look at the modified schematic that applys to the battery holder method. The one where I must use a 9v battery & 4.8v from the battery holder.
the confusion for me is that my battery holder battery voltage is 6v and the battery holder method says 4.8 v. While the rc battery pac or batteries equal to 6v.
So which one applys to me? I'am using a battery holder but it equal 6v not 4.8v.
For clarification the 9v battery is use on both accounts or just for the modified schematic of the $50 robot that uses the cds?
Thanks for yas help