Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Melcin Powell on August 28, 2011, 12:21:58 PM

Title: How to replace DPDT slide switch with a wire?
Post by: Melcin Powell on August 28, 2011, 12:21:58 PM

I know this should be common knowledge, but i do not understand how i could replace the switch with the wire. Please inform how to replace the switch with a wire so as the device would be on while it is plugged in.

Thank you

Title: Re: How to replace DPDT slide switch with a wire?
Post by: Soeren on August 28, 2011, 05:16:31 PM

Hi

Quote from: Melcin Powell on August 28, 2011, 12:21:58 PM

I know this should be common knowledge, but i do not understand how i could replace the switch with the wire. Please inform how to replace the switch with a wire so as the device would be on while it is plugged in.

You really want the fish on that one?

Here's the pole...
Ask yourself what the purpose of the switch is and how you'd draw a switch as well as how you'd draw a wire(/short).

Title: Re: How to replace DPDT slide switch with a wire?
Post by: Melcin Powell on September 01, 2011, 09:00:05 PM

Thank you so much i was able to figure out.