go away spammer

Author Topic: Need some help making "flying" robot  (Read 5188 times)

0 Members and 1 Guest are viewing this topic.

Offline wolfy_9005Topic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Need some help making "flying" robot
« on: March 03, 2007, 08:21:00 PM »
For our science project at school we decided to make a "flying" robot. We are reasonably new to making robots, but know the basics. We just need some help with the flapping motion of the wings. Anyone wanna help me?

Anything will help.

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: Need some help making "flying" robot
« Reply #1 on: March 03, 2007, 08:45:55 PM »
RC airplane with a microcontroller and guidance system? I don't think it is possible to make a machine capable of flying by flapping wings.
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Eco19R

  • Full Member
  • ***
  • Posts: 104
  • Helpful? 0
Re: Need some help making "flying" robot
« Reply #2 on: March 04, 2007, 01:29:31 AM »
They actually have - there is an RC toy on the radio shack website that uses wings for lift -

This is all conjecture but it seems that if you wanted to mount a microcontroller to a flying base a RC helicopter would be the best solution.

Offline JonHylands

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 562
  • Helpful? 3
  • Robot Builder/ Software Developer
    • Jon's Place
Re: Need some help making "flying" robot
« Reply #3 on: March 04, 2007, 06:15:40 AM »
I think building an ornithopter robot would be pretty cool.

Here are some interesting ideas for the base (I posted these in Misc a few days ago):

http://flappingflight.com/
http://www.ornithopter.org/store/rc.html
http://www.raidentech.com/3rarecorcepo.html
http://www.indoor.flyer.co.uk/orni.htm

- Jon

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Need some help making "flying" robot
« Reply #4 on: March 04, 2007, 04:18:47 PM »
check this link out for more inspirational videos
http://www.societyofrobots.com/robotforum/index.php?topic=400.0

i believe all ornithopters use 4 bar linkages to convert from rotational to flapping motion.
here is a webpage to simulate one for your design
http://www.cden-rcci.mcmaster.ca/VisLinkage/index.html

Offline wolfy_9005Topic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Re: Need some help making "flying" robot
« Reply #5 on: March 09, 2007, 06:46:07 AM »
I did some work on it and i sort of pulled apart a small rc car(2 actually) and got 4 tiny little motors ~4x20mm. Also thinking of making something like a crankshaft to convert the rotations into reciprocating motion(or howeves its spelt). Thanks for te above posts.

 


Get Your Ad Here

data_list