Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: izua on May 03, 2008, 12:30:16 PM

Title: Using a sense resistor
Post by: izua on May 03, 2008, 12:30:16 PM

Hey! I've noted that ICs like L298 have a "sense" output, which I used to connect to ground.
How do I measure current via a sense resistor?

Title: Re: Using a sense resistor
Post by: Admin on May 03, 2008, 05:37:02 PM

see schematic at the very bottom:
http://www.societyofrobots.com/sensors_currentsensor.shtml