go away spammer

Author Topic: help me choose a software (C / C + +)  (Read 2949 times)

0 Members and 1 Guest are viewing this topic.

Offline moktar_moktarTopic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
help me choose a software (C / C + +)
« on: March 20, 2011, 07:34:33 PM »
Hello everybody,
I like that someone help me choose a software (C / C + +) Open source, for my robotics tasks contol that has the following characteristics:
-For host: I used Ubuntu .
-For target: Digilent XUP, processor Leon3 (SPARC) and Linux kernel (2.0 or 2.6).
I found a software orocos ,but it does not work on my processor architecture Leon3 (SPARC).

Any help

Offline joe61

  • Supreme Robot
  • *****
  • Posts: 417
  • Helpful? 16
Re: help me choose a software (C / C + +)
« Reply #1 on: March 21, 2011, 06:51:05 AM »
I've seen some things about adding the Leon processor to gcc in their mailing list, but didn't have an interest in it so I didn't follow it. Google gives this http://blog.gmane.org/gmane.comp.hardware.opencores.leon-sparc where you might find what you're looking for.

Joe

Offline moktar_moktarTopic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
Re: help me choose a software (C / C + +)
« Reply #2 on: March 21, 2011, 10:04:24 AM »
Thank you Joe,
but  that's not what  I  seek.

Offline Webbot

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 2,165
  • Helpful? 111
    • Webbot stuff
Re: help me choose a software (C / C + +)
« Reply #3 on: March 21, 2011, 01:21:31 PM »
Moktar - not 100% sure what you are asking here. C vs C++ ?
If so then its been debated many times on this forum.

Depends on your skill level: if you are familiar with structured languages like Basic then go with C, if you know about OO then C++.

BUT - OO/C++ support on most microcontrollers ends up with fairly bloated code or is just a thin veneer on top of C so that it can be called from C++.

My advice: stick with C

Webbot Home: http://webbot.org.uk/
WebbotLib online docs: http://webbot.org.uk/WebbotLibDocs
If your in the neighbourhood: http://www.hovinghamspa.co.uk

Offline moktar_moktarTopic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
Re: help me choose a software (C / C + +)
« Reply #4 on: March 21, 2011, 05:33:59 PM »
Hi Webbot,
I mean someone help  me choose a soft c or c + +  to  integrate  into  the  Linux  embedded  for robotic applications.

Offline Webbot

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 2,165
  • Helpful? 111
    • Webbot stuff
Re: help me choose a software (C / C + +)
« Reply #5 on: March 21, 2011, 05:52:39 PM »
I know nothing about Linux - over and out
Webbot Home: http://webbot.org.uk/
WebbotLib online docs: http://webbot.org.uk/WebbotLibDocs
If your in the neighbourhood: http://www.hovinghamspa.co.uk

Offline richiereynolds

  • Full Member
  • ***
  • Posts: 112
  • Helpful? 3
Re: help me choose a software (C / C + +)
« Reply #6 on: March 22, 2011, 01:44:08 PM »
Hi Webbot,
I mean someone help  me choose a soft c or c + +  to  integrate  into  the  Linux  embedded  for robotic applications.
Hi there, I don't mean to be rude but do you know someone who speaks better English who could rephrase your question? i don't think we can really work out what you're asking.

Offline knossos

  • Robot Overlord
  • ****
  • Posts: 278
  • Helpful? 14
Re: help me choose a software (C / C + +)
« Reply #7 on: March 23, 2011, 04:45:31 PM »
It sounds like you are looking for open source robot control software.
It needs to run on a system with a Leon3 SPARC processor running Ubuntu Linux.
The source code should be C and/or C++.

If this is correct please let us know.
"Never regret thy fall,
O Icarus of the fearless flight
For the greatest tragedy of them all
Is never to feel the burning light."
 
— Oscar Wilde

 


Get Your Ad Here

data_list