Author Topic: Which one is pin 1 on the programmer?  (Read 2864 times)

0 Members and 1 Guest are viewing this topic.

Offline garriwilsonTopic starter

  • Supreme Robot
  • *****
  • Posts: 345
  • Helpful? 0
Which one is pin 1 on the programmer?
« on: July 21, 2007, 10:39:15 AM »
Ok I got the 34 dollar programmer. I know the arrow points to pin 1 but is it the one on top close to the arrow or the one on the bottom?

Offline JonHylands

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 562
  • Helpful? 3
  • Robot Builder/ Software Developer
    • Jon's Place
Re: Which one is pin 1 on the programmer?
« Reply #1 on: July 21, 2007, 06:11:59 PM »
The arrow is pointing towards pin 1 - its the one on the same side of the connector as the arrow is.

- Jon

Offline Kohanbash

  • Supreme Robot
  • *****
  • Posts: 430
  • Helpful? 1
Re: Which one is pin 1 on the programmer?
« Reply #2 on: July 21, 2007, 07:46:29 PM »
If you can see the soldered side of the board, pin 1 is usually soldered in a square patch and the rest are in the normal circle patch.
Robots for Roboticists Blog - http://robotsforroboticists.com/

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Which one is pin 1 on the programmer?
« Reply #3 on: July 22, 2007, 10:47:20 AM »

Offline garriwilsonTopic starter

  • Supreme Robot
  • *****
  • Posts: 345
  • Helpful? 0
Re: Which one is pin 1 on the programmer?
« Reply #4 on: July 22, 2007, 03:04:47 PM »
Ok thanks guys you did it again!

 


Get Your Ad Here