Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
This allowed for automatic switching to the terminal once the programming was complete. Would you guys like to have this included before I release the first version?
Good idea with saving to txt is a really good idea. Any format you guys want it in? Maybe a csv?
ie record input to file, play file to output, and perhaps Xmodem type file transfers (but I've only needed that when doing things like flashing the Blackfin so low priority), but also terminal emulation (eg VT100 is easy).
Quote from: Webbot on April 14, 2011, 04:06:56 PMie record input to file, play file to output, and perhaps Xmodem type file transfers (but I've only needed that when doing things like flashing the Blackfin so low priority), but also terminal emulation (eg VT100 is easy).Could you give me more information on terminal emulation?What is it? What does it? How does it work? (don't need anything in great detail, just an outline so I know what to look for in my research)
I haven't timed it yet, but it takes approximately 1min. I should be able to bring it down to less than 10s.
The 7-8 second delay when retrieving the COM ports is most likely caused by the bluetooth stack (SPP). I will try to figure out a work around for the bluetooth stack problem.
Yep,You should be able to assuming you get the Bluetooth on before you do a power cycle (since power cycling when using the axon as a power source will disconnect the bluetooth from the pc)