Author Topic: Launchpad killer  (Read 2172 times)

0 Members and 1 Guest are viewing this topic.

Offline Razor ConceptsTopic starter

  • Supreme Robot
  • *****
  • Posts: 1,856
  • Helpful? 53
    • RazorConcepts
Launchpad killer
« on: September 20, 2010, 04:02:17 AM »

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Launchpad killer
« Reply #1 on: September 22, 2010, 04:27:41 PM »
Hi,

Nice, but as you know, I have one allready (just need to find a triple-A size Lithium cell with solder tags for it - pretty elusive stuff it seems)  :)
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline amando96

  • Robot Overlord
  • ****
  • Posts: 187
  • Helpful? 1
Re: Launchpad killer
« Reply #2 on: October 03, 2010, 04:19:55 AM »
Speaking of launchpad and killer... that thing can only source 6mA per pin, and if you're using all the pins it's a combined maximum of 12mA...
Rorcle, 60% complete
AATV, 5% complete

Offline TrickyNekro

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 1,208
  • Helpful? 15
  • Hardware and Firmware Designer
    • The Hellinic Robots Portal
Re: Launchpad killer
« Reply #3 on: October 03, 2010, 09:08:30 AM »
Speaking of launchpad and killer... that thing can only source 6mA per pin, and if you're using all the pins it's a combined maximum of 12mA...

Hey you kidding me??? That's a tone of current....

Have you tried any ARM pin.... it's like 60uA on each pin.... give me a brake....
For whom the interrupts toll...

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Launchpad killer
« Reply #4 on: October 03, 2010, 01:20:21 PM »
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here

data_list