Society of Robots - Robot Forum

Software => Software => Topic started by: ipfpv on November 10, 2011, 04:25:41 AM

Title: [advertisement] internet controlled robot software
Post by: ipfpv on November 10, 2011, 04:25:41 AM
Developing a free applacation for remote control and first person view via the Internet.
I guess download will be available this month.
http://www.ipfpv.com/ (http://www.ipfpv.com/)
Note: The downloading is currently not available.
Title: Re: [advertisement] internet controlled robot software
Post by: ipfpv on November 14, 2011, 12:39:10 AM
my experiments in the video transmission and control via the Internet using 3G modem:
http://www.youtube.com/my_videos?feature=mhee (http://www.youtube.com/my_videos?feature=mhee)
Title: Re: [advertisement] internet controlled robot software
Post by: ipfpv on November 19, 2011, 05:43:17 AM
download available on the web page http://www.ipfpv.com/ (http://www.ipfpv.com/)

Title: Re: [advertisement] internet controlled robot software
Post by: ipfpv on November 20, 2011, 11:25:42 AM
The application is free (donations are optional). It consists of two parts, the first installed on the host computer is connected to a joystick or a transmitter using sim cable. The second part of the software is installed on board, the onboard computer is connected to a webcam, servo using the servo-controller and GPS receiver. On board video and GPS telemetry is transmitted over Internet realtime to base. From base comes on board control commands.

It has now become aware of problems with running under Win x64.
Title: Re: [advertisement] internet controlled robot software
Post by: ipfpv on December 03, 2011, 11:05:19 AM
Updated build 0.0.11.1203 at: http://ipfpv.com/ (http://ipfpv.com/)

Now you can adjust the size of video packets (maximum packet size - 64K), and IN and OUT buffers size. If video frames does not display completely, most likely need to increase video buffer size. For joystick added all possible axes and 20 buttons. Fixed an issue running on 64 bit.