Author Topic: Resistors?  (Read 2067 times)

0 Members and 1 Guest are viewing this topic.

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Resistors?
« on: May 17, 2009, 07:56:06 AM »
I am building the 50 dollar robot and I bought some resistors from Radio Shack. I needed 1.62 Kohm and a 340 ohm, but they only had 1.5 Kohm and 330 ohm. Would that make much of a difference ???
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Re: Resistors?
« Reply #1 on: May 17, 2009, 08:03:27 AM »
I found out more about the 330 via SoR fourm but... I still need help about the 1.62Kohm vs. 1.5Kohm
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.

Offline LunchBox!

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 2
Re: Resistors?
« Reply #2 on: May 17, 2009, 09:35:57 AM »
depending on the tolerance band of the 1.62 the 1.5 should be fine.

its most likely a + or - 10% (silver band)

1.62 x 10% = 0.162
1.62 - 0.162 = 1.458

measure ur 1.5's and pick the one with the highest value.
« Last Edit: May 17, 2009, 09:49:02 AM by LunchBox! »

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Resistors?
« Reply #3 on: May 30, 2009, 09:31:57 AM »
You'll be fine.

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Re: Resistors?
« Reply #4 on: May 31, 2009, 07:04:15 AM »
Ok good thank you both!
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.

 


Get Your Ad Here

data_list