Society of Robots - Robot Forum
Mechanics and Construction => Mechanics and Construction => Topic started by: Robot_Longbordr on July 28, 2011, 10:57:58 PM
-
Has anyone out there modified an HS-485HB for continuous rotation? i am planning using two of these two power my robot but didnt know if they could be modified and if so what method would i use, would i use admins tutorial for continuous rotation or something else
thanks!
on a side note im using an axon 2 and i was curious on what to use to connect a sharp GP2Y0A02YK0F sensor, also to connect anything else to the axon 2 i was thinking these jumper cables http://www.robotshop.com/schmartboard-100-x-12-jumpers.html (http://www.robotshop.com/schmartboard-100-x-12-jumpers.html) would these work also if i wanted to connect a blackfin camera to my axon 2
Thanks for any help