go away spammer

Author Topic: HELP! Axon fails to program .hex  (Read 2045 times)

0 Members and 1 Guest are viewing this topic.

Offline walle2.0Topic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
HELP! Axon fails to program .hex
« on: April 06, 2010, 12:05:16 PM »
I purchased an Axon microcontroller off of SOR a few months ago.  I am using it for a school project.  Last night the robot started acting strange, and today it will not program.  I receive the following error:

=================================================
|             BOOTLOADER, Target: V2.1          |
=================================================
COM dev  : /dev/ttyUSB0
Baudrate : 115200
Program  : Axon.hex
-------------------------------------------------
Waiting for device... Press CTRL+C to exit. \
...Connected!
Bootloader    : V2.1
Target        : 1E9608 Device not in "devices.txt"
Buffer        :   7168 Bytes
Size available:  64512 Bytes

CRC enabled and OK.
Reading Axon.hex... File read.
Highest address in hex file: 0x07883 (30851 Bytes)
Writing program memory...
Programming "Axon.hex": 00000 - 01C00 failed. Did not receive CONTINUE despite more data to write. Got 0x000D (13)


I am using Ubuntu 9.10, but I can use windows if I must.  PLEASE HELP!!!  We have a competition next week, and the robot is broken right now.  Thanks in advance!

Offline walle2.0Topic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: HELP! Axon fails to program .hex
« Reply #1 on: April 06, 2010, 05:09:40 PM »
I think this has been solved....

Our buck converter went haywire due to a quick soldering job  :-\.  I will post again if I have further issues.

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: HELP! Axon fails to program .hex
« Reply #2 on: July 20, 2010, 06:43:26 AM »
Did it work out?

 


Get Your Ad Here