Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: BuddingContraptionist on October 17, 2008, 09:55:59 PM
-
If I'm going to make a simple serial wire to talk to my pc port from one of the Axon UARTs... do i need to make a "level shifter"?
-
pc port
You mean a serial port?
You can buy a TTL to serial adaptor, or use RS232.
This is probably the cheapest/easiest:
http://www.sparkfun.com/commerce/product_info.php?products_id=133
Or to make your own, here is a schematic/info:
http://www.societyofrobots.com/microcontroller_uart.shtml