Author Topic: Servo didn't come with mounting hardware?  (Read 4732 times)

0 Members and 1 Guest are viewing this topic.

Offline offyTopic starter

  • Supreme Robot
  • *****
  • Posts: 340
  • Helpful? 1
Servo didn't come with mounting hardware?
« on: March 09, 2009, 01:12:01 PM »
I bought the HS-311 servo's and it said it would come with mounting hardware. I looked and didn't find anything for use. Could someone tell me how to mount a servo _ and the screws needed to go this way | so it will attach to the chassis.
Logged

Offline superchiku

  • Supreme Robot
  • *****
  • Posts: 952
  • Helpful? 5
  • cooll
Re: Servo didn't come with mounting hardware?
« Reply #1 on: March 09, 2009, 02:03:18 PM »
the servo mut hve 2 holes one each side of the wheel...those can be used fr attaching
Logged
JAYDEEP ...

IT AND ROBOTICS ENGINEER

"IN THE END IT DOESNT EVEN MATTER"

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,431
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
    • Nerdcore - Programming, Electronics, Mechanics
Re: Servo didn't come with mounting hardware?
« Reply #2 on: March 09, 2009, 04:25:59 PM »
That is correct, the parts list does not mention mounting posts only mounting hardware:

When it says servo hardware it is referring to the eyelets grommets and screws.

http://www.servocity.com/html/servo_mounting_hardware.html
Logged

Offline offyTopic starter

  • Supreme Robot
  • *****
  • Posts: 340
  • Helpful? 1
Re: Servo didn't come with mounting hardware?
« Reply #3 on: March 09, 2009, 04:27:58 PM »
is there a way I can make it bed 90 degrees so I can attach it to the chassis.
Logged

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,431
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
    • Nerdcore - Programming, Electronics, Mechanics
Re: Servo didn't come with mounting hardware?
« Reply #4 on: March 09, 2009, 04:29:14 PM »
These are easy to attach to the bottom of your chassis

http://www.lynxmotion.com/Product.aspx?productID=286&CategoryID=87
Logged

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,431
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
    • Nerdcore - Programming, Electronics, Mechanics
Re: Servo didn't come with mounting hardware?
« Reply #5 on: March 09, 2009, 04:31:12 PM »
The easy way to do this is to bend an L out of a bracket of some sort

http://www.trossenrobotics.com/store/p/3333-E-Z-Aluminum-Servo-Bracket-Two-Pack.aspx?feed=Froogle
Logged

Offline offyTopic starter

  • Supreme Robot
  • *****
  • Posts: 340
  • Helpful? 1
Re: Servo didn't come with mounting hardware?
« Reply #6 on: March 09, 2009, 04:41:24 PM »
I will search my house for some old toy from when I was little to find some metal and bend it. Great idea. Thanks. *Searches for scrap metal*
Logged

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,704
  • Helpful? 173
    • Society of Robots
Re: Servo didn't come with mounting hardware?
« Reply #7 on: March 26, 2009, 01:23:22 AM »
Logged
 

SMF spam blocked by CleanTalk