Author Topic: hbridge IC that can be run by 3V logic  (Read 3996 times)

0 Members and 1 Guest are viewing this topic.

Offline anilgTopic starter

  • Jr. Member
  • **
  • Posts: 15
  • Helpful? 0
hbridge IC that can be run by 3V logic
« on: February 03, 2008, 10:10:40 PM »
Hi is there a hbridge  IC (like L293D) that can be run using a 3V logic?

And would l293D run if i were to set Vss as 5 V but send only a signal of 3V?
Logged

Offline hgordon

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 373
  • Helpful? 7
    • Surveyor Robotics Journal
Re: hbridge IC that can be run by 3V logic
« Reply #1 on: February 04, 2008, 06:53:13 AM »
Most 5V logic won't have a problem being driven by 3.3V signals.  We run the Fairchild FAN8200 H-bridge with 3.3V control signals.
Logged
Surveyor Corporation
  www.surveyor.com

Offline anilgTopic starter

  • Jr. Member
  • **
  • Posts: 15
  • Helpful? 0
Re: hbridge IC that can be run by 3V logic
« Reply #2 on: February 04, 2008, 09:51:10 PM »
Quote from: hgordon on February 04, 2008, 06:53:13 AM
Most 5V logic won't have a problem being driven by 3.3V signals.  We run the Fairchild FAN8200 H-bridge with 3.3V control signals.


I'm using l293D and am unable to drive it. Is  there an IC that can convert a 3V signal to a 5V signal (I can arrange for a 5V battery)
Logged
 

SMF spam blocked by CleanTalk