Author Topic: Preventing a Servo from moving?  (Read 2974 times)

0 Members and 1 Guest are viewing this topic.

Offline tooslowgamerTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Preventing a Servo from moving?
« on: June 27, 2009, 06:57:55 PM »
What would happen to a (360 modified) servo (HS-311, to be specific.  With nylon gears.) if you just held it there and prevented it from spinning?  Would it break the gears really fast, or would it take a while letting it try to spin before the gears and stuff broke?
Logged

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: Preventing a Servo from moving?
« Reply #1 on: June 27, 2009, 07:15:44 PM »
the gears would most likely strip or it would just stay put.
depends on the servos really
Logged
Howdy

Offline HDL_CinC_Dragon

  • Supreme Robot
  • *****
  • Posts: 1,261
  • Helpful? 5
Re: Preventing a Servo from moving?
« Reply #2 on: June 27, 2009, 07:18:45 PM »
Most likely you would burn out the motor if you did it for too long.
Logged
United States Marine Corps
Infantry
Returns to society: 2014JAN11

Offline tooslowgamerTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: Preventing a Servo from moving?
« Reply #3 on: June 27, 2009, 09:56:56 PM »
How long before they stop moving?
Logged

Offline ArcMan

  • Supreme Robot
  • *****
  • Posts: 519
  • Helpful? 4
  • Mmmm... Plasma
Re: Preventing a Servo from moving?
« Reply #4 on: June 29, 2009, 03:08:44 PM »
Your gears would not strip.  I've done it to every servo I've ever bought, and the gears have never stripped.  That would be a very poor mechanical design if they did.  As Dragon said, the motor would probably eventually get too hot, so you should not run it stalled for very long.
Logged
 

SMF spam blocked by CleanTalk