go_away

Author Topic: neat looking biped  (Read 2315 times)

0 Members and 1 Guest are viewing this topic.

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
neat looking biped
« on: May 04, 2007, 06:35:03 PM »
From the website:
"There are 4 DOF, each powered by a high speed nano servo (Tower Hobbies TS-5). These servos are rated at 20.8 oz-in of torque at 6.0V and only weigh 0.34oz. The final weight of the robot is about 12oz. The sensor array consists of 4 touch sensors on the bottom of each foot, Left and right IR obstacle detection, and 4 CdS photo detectors located on all four sides of the robot. The heart of the control system is a Microchip PIC16F819 micro-controller and a separate 8 channel A-D converter. I originally designed the control system using a PIC16F84, but I later switched to the PIC16F819 so I could use the Microchip ICD2 in-circuit debugger/programmer. The PIC16F819 is pin compatible with the PIC16F84, but has more peripheral options like a built-in 10-bit 5-channel A-D converter. The ICD2 has worked great (unlike the original ICD) and I would definitely recommend it."

http://home.ctlnet.com/~minimechadon/minimechadon.htm
(avi videos at the bottom of the page)


Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: neat looking biped
« Reply #1 on: May 04, 2007, 06:49:09 PM »
pretty cool. I like how they used the pcs board for a contruction material
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Hal9000

  • Supreme Robot
  • *****
  • Posts: 338
  • Helpful? 0
Re: neat looking biped
« Reply #2 on: May 12, 2007, 07:12:22 AM »
That is some crazy robot
"The truth is, you can't hide from the truth, cos the truth is all there is" - Handsome Boy Modeling School

 


Get Your Ad Here