2

Author Topic: Resistor - for 50$ robot  (Read 806 times)

0 Members and 1 Guest are viewing this topic.

Offline farsam1984Topic starter

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 0
Resistor - for 50$ robot
« on: February 08, 2010, 01:00:26 AM »
Hi
Is it okay to use a combination of 2 or more resistors(in Series form) to get 340-ohm Resistor ?
i couldn't find 340-ohm and 1620-ohm resistors (i found some around that value such as 330-ohm)so i decided to assemble that way,Will it cause any problems?

Thanks for your attention



Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: Resistor - for 50$ robot
« Reply #1 on: February 08, 2010, 01:39:31 AM »
What is the application? Most times resistors don't have to be too accurate.
But yes, you can put multiple resistors together to make a higher resistance value.
Howdy

Offline Webbot

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 2,150
  • Helpful? 109
Re: Resistor - for 50$ robot
« Reply #2 on: February 08, 2010, 02:15:04 AM »
Not sure what the scenario is but most resistors (unless specified) are + or - 10% anyway.

So for 340 ohm - a 330 ohm; for a 1620 ohm then a 1.6k (ie 1600 ohm) are probably ok.

Let us know where you get the figures from - and what they are used for - then we can give you thumbs up/down.

« Last Edit: February 09, 2010, 12:25:55 PM by Webbot »
Webbot Home: http://webbot.org.uk/
WebbotLib online docs: http://webbot.org.uk/WebbotLibDocs
If your in the neighbourhood: http://www.hovinghamspa.co.uk

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: Resistor - for 50$ robot
« Reply #3 on: February 08, 2010, 03:42:03 AM »
Let us know where you get the figures from - and what they are used for - then we can give you thumbs up/down.
http://www.societyofrobots.com/step_by_step_robot_step1.shtml 0_o?
Anyway, as Webbot said, most resistors close to the range will work. i used a 1.5k resistor on my $50 robot.
And for the 340ohm resistor, its for an led so anything around 200-400 should be fine...
Howdy

 


Get Your Ad Here