go_away

Author Topic: Battery charger  (Read 606 times)

0 Members and 1 Guest are viewing this topic.

Offline XyverTopic starter

  • Robot Overlord
  • ****
  • Posts: 125
  • Helpful? 0
Battery charger
« on: March 27, 2010, 01:31:45 PM »
Ok I have this battery charger:  http://www.walmart.com/ip/Energizer-Family-Battery-Charger/10242691#ProductDetail
And i was wondering do you think that it will only charge the ususal AAA, AA, C, D and 9volt, or could i attach a 6 volt or something to a 9 volt battery clip and stick it on?  Will it charge any NiMH batteries or just the standered ones.

Offline waltr

  • Supreme Robot
  • *****
  • Posts: 1,943
  • Helpful? 98
Re: Battery charger
« Reply #1 on: March 27, 2010, 02:53:39 PM »
The Item Description Says:

"It charges up to eight AA, eight AAA, four C, four D, or two 9-volt NiMH rechargeable batteries".

Which indicates that it can charge less than 8 AA's, etc at a time. It is another of those devices where the description is short and vague and you need to buy it to read the manual. But, the first reviewer wrote a very good description.

Offline XyverTopic starter

  • Robot Overlord
  • ****
  • Posts: 125
  • Helpful? 0
Re: Battery charger
« Reply #2 on: March 30, 2010, 07:37:51 PM »
Now that i read through it, thats not the charger i have.  The picture is the charger i have, but the description is all wrong.  I'll go read the manuel.

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Battery charger
« Reply #3 on: March 30, 2010, 11:08:10 PM »
Hi,

I'll go read the manuel.
Allways a good start  ;D
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here

data_list