Axon Test Hex 1

[Razor Concepts]

I am using an Axon original, trying to upload the text hex file one (toggling all ports). AVR Studio reports that the hex file is not a valid intel hex file. The other examples work, except that first one. Can anyone else verify this? I am using the AVR ISP MKII

[Admin]

Where did you find the .hex?

Possible upload error on my part . . .

[Razor Concepts]

Bringin this up again

Here are the two last lines of the hex, last one seems missing parts?

Code: [Select]

:1009C00050E00E9449028BE295E026E334E0B90151
:1009D00040E150E00E944902CF91DF9108
Error message: :Getting isp parameter.. SD=0x06 .. OKThe specified file is not a valid Intel HEX file

Also what is the default baud rate?

[Admin]

Again, where did you find that .hex file link?
(it looks broken)

Also what is the default baud rate?

For what? If you mean for the $50 Robot, you can specify it in the code. Its all commented.

[Razor Concepts]

Oops again!
http://www.societyofrobots.com/axon/axon_function_list.shtml

[Admin]

80% of the file somehow went missing. On both my PC and the web copy . . . but found another copy thats complete so no worries.

http://www.societyofrobots.com/axon/downloads/axon_tst.hex

Let me know how it goes.

[Razor Concepts]

"1" and "port" get repeated over and over again without line breaks

Can somebody with an Axon 1 verify this? My Axon has been "re-heated"

[Admin]

"1" and "port" get repeated over and over again without line breaks

Can somebody with an Axon 1 verify this? My Axon has been "re-heated"

Yeap, thats correct. Each UART port transmits its port number, and all the pins should be turning on/off ever second or so.