Author Topic: Trade CRS A255 for Tractor  (Read 1928 times)

0 Members and 1 Guest are viewing this topic.

Offline gp99Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Trade CRS A255 for Tractor
« on: June 07, 2010, 02:50:19 PM »
Through some horsetrading, I have acquired 2 CRS A255 arms and one C500 Controller.
I would really like to keep them but, I need a 4wheel drive tractor with a bucket in front.
It does not have to be running but no junk. ( A new one wouldn't hurt either). I will consider all sizes and manufacturers.
My wife is disabled and my health is in not much better condition so the need for the tractor is greater than the robotics...darn....I do a lot of tinkering, machining, and fabricating and whatever trouble I can get into that she doesn't know about!
 I did not get the umbilicals or the teaching pendant so I do not know if they work or not.
 When cleaning the arms, they looked in great condition and when I plugged in the C500 controller the lights behind the buttons came on as did the fan.
One arm is a CRS Robotics A255 with no end effector and the other arm is a CRS PLUS A255 with a pneumatic gripper.
I also have the optional homing bracket and optional GPIO cable.
 Are they only worth the price of a headlight on a tractor ???<G>!!
 I will consider all offers and make a decision by the end of June.
« Last Edit: June 08, 2010, 04:44:19 AM by gp99 »


 


Get Your Ad Here

data_list