go_away

Author Topic: PID Line Follower By Pratheek PCB Dimensions  (Read 2184 times)

0 Members and 1 Guest are viewing this topic.

Offline zebrainTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
PID Line Follower By Pratheek PCB Dimensions
« on: August 11, 2010, 12:24:36 PM »
The dimensions of the sensor array as well as the main PCB is given to be the same i.e 10cm x 4.5cm.It must be rite for the sensor array,so what is the correct dimensions for the main board??

Offline Aravindh

  • Beginner
  • *
  • Posts: 5
  • Helpful? 0
Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #1 on: September 25, 2010, 05:19:45 AM »
Hi the dimensions arent correct...
U have to create ur own diagram and u cant fabricate the pcb given in the diagram..

Offline nik@sdm

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #2 on: December 25, 2011, 10:07:07 AM »
hey anyone...
please tell me where the push buttons need to be connected!

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #3 on: December 25, 2011, 01:59:53 PM »
Please don't post the same question in several (old) threads!
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline nik@sdm

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #4 on: December 25, 2011, 11:09:13 PM »
hi soren....
i just wanted to know .......
1)where the push buttons are connected .
2)what is the meaning of IC1 in the figure
3)there are 7 pins at the bottom of the board(just below the ATmeag16 IC),nothing is mentioned about them....so what must be connected to them!
link is http://www.societyofrobots.com/member_tutorials/book/export/html/350
I'll be really grateful to u... pls help me out of this situation. 

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #5 on: December 26, 2011, 09:57:30 AM »
hi soren....
i just wanted to know .......
Yeah yeah, but that is not an excuse for multiposting (spamming) with the same question.
No reason for verbatim copy to my PM either - One post in the public forum will do (and not annout the daylight out of other people).
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here

data_list