go_away

Author Topic: wheel fitting problem  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

Offline 123laurensTopic starter

  • Full Member
  • ***
  • Posts: 59
  • Helpful? 0
wheel fitting problem
« on: October 06, 2010, 11:39:47 AM »
this will be my first robot,so im very new to this...
because i live in south Africa,i am going to buy parts from only sparkfun to reduce shipping costs.
but now i need help weather these wheels:
http://www.sparkfun.com/commerce/product_info.php?products_id=421
wil work on these pre-modified servos:
http://www.sparkfun.com/commerce/product_info.php?products_id=9347
it seas they are related to the modified servo but not in the description
will they work?
are there eny other wheels that will fit?i think that these MAY work because of the holes and the servo comes with an X thing that may fit

Offline Conscripted

  • Robot Overlord
  • ****
  • Posts: 291
  • Helpful? 10
Re: wheel fitting problem
« Reply #1 on: October 06, 2010, 02:35:46 PM »
You should be able to get this to work. You will need to put a servo horn on the servo and then attach the wheel to the servo horn. Small screws or even EPOXY would probably work for a small robot.

Conscripted

 


Get Your Ad Here