go_away

Author Topic: Very Fast Line Follower Robot With PID Control  (Read 3996 times)

0 Members and 1 Guest are viewing this topic.

Offline silexTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Very Fast Line Follower Robot With PID Control
« on: December 06, 2010, 09:04:20 AM »
Hello guys,

I have graduated from Ankara University Electronics Engineering Department this year. I have been working on robots for 3 years. Here is my last line follower robot to be participate in robot competitions will be held in 2011, Turkey.

[youtube]EzmPgw9Hh0s[/youtube]

Thanks for watching.
« Last Edit: December 06, 2010, 09:05:32 AM by silex »

Offline futurrobotech

  • Full Member
  • ***
  • Posts: 64
  • Helpful? 0
Re: Very Fast Line Follower Robot With PID Control
« Reply #1 on: December 06, 2010, 08:35:08 PM »
Very nice design.. Quick and stays on track very well

Offline aruna1

  • Supreme Robot
  • *****
  • Posts: 381
  • Helpful? 4
  • I'm an Ordinary guy
Re: Very Fast Line Follower Robot With PID Control
« Reply #2 on: December 17, 2010, 09:54:23 AM »
Hello guys,

I have graduated from Ankara University Electronics Engineering Department this year. I have been working on robots for 3 years. Here is my last line follower robot to be participate in robot competitions will be held in 2011, Turkey.

[youtube]EzmPgw9Hh0s[/youtube]

Thanks for watching.
hi what are the motors you used in this robot?
I'm Me

Offline azy

  • Full Member
  • ***
  • Posts: 107
  • Helpful? 0
Re: Very Fast Line Follower Robot With PID Control
« Reply #3 on: January 03, 2011, 06:28:19 AM »
I wonder how long it is before the world champion slot car racer is a robot

that would be awesome to watch as the slotcars can reach speeds of up to 100 mph on tracks little wider than scalextric

Ive seen and done some crazy things in my time but this always leaves my brain well and truly fried !

Ultra Fast Car - Acelerando Forte... Muito Rápido!!!


there is no such thing as anticipating a corner at these speeds , its just micro second instinct timing your braking, your ears being more important than your eyes

at the end when hes cruising to a halt on the brakes its done by induction braking. If i recall correctly the motors spin about a quarter of a million revs a minute. Track is not magnetized but they use special sticky spongy tires and spray stuff on the track
« Last Edit: January 03, 2011, 06:42:13 AM by azy »

 


Get Your Ad Here

data_list