Author Topic: Merry Christmas!  (Read 797 times)

0 Members and 1 Guest are viewing this topic.

Offline SoerenTopic starter

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Merry Christmas!
« on: December 23, 2010, 01:54:03 AM »
Hi All,

Just an early Merry X-mas from me, as I'm heading for Germany in a couple of hours and won't be online until late on the 25th.

May (some of) your wishes come through  ;D
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline Redcap

  • Full Member
  • ***
  • Posts: 80
  • Helpful? 11
Re: Merry Christmas!
« Reply #1 on: December 24, 2010, 08:05:14 PM »
Merry Christmas everyone :)

Sorry I've been lurking more than conversing.

Hope you have fun in Germany, Soeren :)

Offline Ro-Bot-X

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 1,431
  • Helpful? 25
  • Store: RoBotXDesigns.ca
Re: Merry Christmas!
« Reply #2 on: December 25, 2010, 06:56:56 AM »
Merry Christmas to everyone! Nice morning here, Santa brought lots of servos! Now I have to build a humanoid... or hexapod? He-he!
Check out the uBotino robot controller!

Offline TrickyNekro

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 1,207
  • Helpful? 15
  • 1.6L Peugeot 307 tuner
Re: Merry Christmas!
« Reply #3 on: December 25, 2010, 07:24:20 PM »
Marry Christmas from me too :-)

Although it seems that Santa here is on strike.... We will see what we can get from Mouser :P
For whom the interrupts toll...


P.S. I've been inactive for almost a year... Don't give promises but I'll try to complete my tutorials. I'll let you know when..

Cheers!

Offline SoerenTopic starter

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Merry Christmas!
« Reply #4 on: December 27, 2010, 06:46:48 AM »
Hi,

Hope you have fun in Germany, Soeren :)
Thanks, I did, but the trip down there was stretched into 11.5 hours (usually 5 hours) due to a blizzard. Waiting in the cold and then hitting an overheated train or bus for a bit of the trip, then waiting some more, freezing then overheating several times is probably the reason that our colds came back amplified.
But Christmas Evening was nice and cozy and the return trip went reasonably pain free  ;D

So did you all score well with Santa?
(Anyway, a lump of coal just needs a little pressure  :P)
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,658
  • Helpful? 169
    • Society of Robots
Re: Merry Christmas!
« Reply #5 on: December 27, 2010, 11:46:58 AM »
Santa was good to me! hehehe ::)

Offline Redcap

  • Full Member
  • ***
  • Posts: 80
  • Helpful? 11
Re: Merry Christmas!
« Reply #6 on: December 30, 2010, 11:44:06 PM »
the trip down there was stretched into 11.5 hours (usually 5 hours) due to a blizzard.

Ouch... Though I dare say it's a bit better than being caught mid-air in one 8)
Sorry to hear the journey there was so rough though. Pretty sure the dramatic temp changes would have made myself somewhat nauseous  :-\

The Electronic Santa was nice to me: got a few servos, IR LED's and various bits & pieces to tinker with

 


Get Your Ad Here