Author Topic: $50 Robot AVRISP mkll Programmer Wiring Question  (Read 1666 times)

0 Members and 1 Guest are viewing this topic.

Offline blooflipperTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
$50 Robot AVRISP mkll Programmer Wiring Question
« on: February 05, 2011, 02:46:07 PM »
I'm using the AVRISP mkll programmer to build my $50 dollar robot instead of the Serial Port Dongle Programmer. I'm using a PC board and and the RC battery pack suggested in the tutorial to power my robot. I'm kind of confused by how I need to wire my board using the 2x3 header instead of the 2x5. If someone made their robot like this it would be great if you could post pictures of the wiring on your PC board or explain how to wire it for the 2x3 header.

Offline greywanderer012345

  • Robot Overlord
  • ****
  • Posts: 133
  • Helpful? 2
Re: $50 Robot AVRISP mkll Programmer Wiring Question
« Reply #1 on: February 05, 2011, 09:46:53 PM »
Scroll down to admin's 2nd post here. The drawing is of where the pins should be on TOP of the board.


Get Your Ad Here