I have been using a BlueSmirf Gold blue tooth device with my robot for a while. It has been really helpful with remote debugging and data analysis.
Today I did something really dumb. After re-arranging some components, I powered up the robot without double checking the power connection. The ground and VCC lines on the bluesmirf were reverse and by the time I realized that the lights weren't flashing like normal and that something must be wrong, POP. Something blew out. Luckily, it was just a smd capacitor (I think).
My problem is, I am unsure if it was actually a capacitor and I have no clue as to its ratings so I can try to find a replacement instead of buying a new device for $50+.
I haven't been able to find any conclusive information when checking Google but I believe it is a 10uF smd cap. Probably has a voltage rating of at least 5v, if I am looking at the correct device on the schematic. It looks like it has an ident string of C106L, but searching for that doesn't bring up a specific part.
So pretty much, I am just looking for someone to verify my guess on the device.
Product Page: http://www.sparkfun.com/products/582
Blown Device: http://i37.photobucket.com/albums/e72/Ryltar/DSCN1139.jpg
SF Image of Device: http://dlnmh9ip6v2uc.cloudfront.net/images/products/00582-03-L.jpg
(green board version)