Author Topic: How to modify Harbor Freight wheels to fit wheel chair motor  (Read 1538 times)

0 Members and 1 Guest are viewing this topic.

Offline BANETopic starter

  • Supreme Robot
  • *****
  • Posts: 639
  • Helpful? 4
  • E=roboticsC^2
On my most recent robot i have 4 13" wheels driven by wheel chair motors.  Someone asked me to make a vid on how i did it so here it is:)

showing how i converted some $13 harbor freight wheels to work with 17mm keyslot motor shafts. For some reason with goofy video format doesnt have sound so srry. I found the 17mm wheel chair hubs on the net for $25 each. In total it costs about $37 for each wheel which is killer considering i was going to pay a machine shop close to $300 to custom make four adapters for the tires. anyways, i hope this helps anyone who want to do something simular.

Wheel conversion for power chair motor shaft
« Last Edit: May 21, 2011, 09:23:39 PM by BANE »

 


Get Your Ad Here