Author Topic: CNC Plasma Cut  (Read 3549 times)

0 Members and 1 Guest are viewing this topic.

Offline QuciferTopic starter

  • Jr. Member
  • **
  • Posts: 13
  • Helpful? 0
CNC Plasma Cut
« on: June 29, 2007, 09:09:06 PM »
Hey everyone, I told you guys I would post pics of the next thing I cut, so here they are. These are triple trees for a mini bike. I cut them this evening. I took picture with a ruler on top so you could see how precise the machine is, but the lighting did not allow you to see the details on the ruler, so here is the best pic I got. No ruler, but this is as close as I can get with the camera before the flash drowns out the whole pic.

Offline QuciferTopic starter

  • Jr. Member
  • **
  • Posts: 13
  • Helpful? 0
Re: CNC Plasma Cut
« Reply #1 on: July 02, 2007, 06:25:20 PM »
Just wanted to show you what those pieces in the first pic became.

Offline inkel

  • Jr. Member
  • **
  • Posts: 17
  • Helpful? 0
Re: CNC Plasma Cut
« Reply #2 on: July 04, 2007, 04:14:37 AM »
Will you make  a  new type bicycle? or other ?

Offline QuciferTopic starter

  • Jr. Member
  • **
  • Posts: 13
  • Helpful? 0
Re: CNC Plasma Cut
« Reply #3 on: July 04, 2007, 05:42:01 AM »
Im sorry, but I dont quite understand what you are asking. If you are asking what is in the picture, its a classic style mini bike. It uses a lawnmower engine for power. Some people have converted them over to electric power, and run them off of a couple of car batteries.

Offline Steve Joblin

  • Supreme Robot
  • *****
  • Posts: 405
  • Helpful? 2
Re: CNC Plasma Cut
« Reply #4 on: July 04, 2007, 09:41:06 AM »
Qucifer - I'm sory, but I don't quite understand what making a mini bike frame has anything to do with robots (unless of course, you are making a robotic mini bike).  Your CNC Plasma Cutter sounds awesome for fabbing custom parts... any chance you might show us a picture of what the CNC Plasma Cutter looks like?

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: CNC Plasma Cut
« Reply #5 on: July 04, 2007, 11:24:07 AM »
Qucifer - I'm sory, but I don't quite understand what making a mini bike frame has anything to do with robots (unless of course, you are making a robotic mini bike).  Your CNC Plasma Cutter sounds awesome for fabbing custom parts... any chance you might show us a picture of what the CNC Plasma Cutter looks like?
he's showing wht teh plama cutte is capable of doing
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline sotu

  • Supreme Robot
  • *****
  • Posts: 350
  • Helpful? 0
  • ´BB - Eye Biped Bot
Re: CNC Plasma Cut
« Reply #6 on: July 04, 2007, 02:43:38 PM »
any chance you might show us a picture of what the CNC Plasma Cutter looks like?
Google it, u get a lot of awsome picture of the plasma cutter!
How to build a biped bot:

Offline QuciferTopic starter

  • Jr. Member
  • **
  • Posts: 13
  • Helpful? 0
Re: CNC Plasma Cut
« Reply #7 on: July 04, 2007, 07:12:29 PM »
Since I have no experience with robots, I need ideas for some frame parts to cut. Here is a picture of something I cut today, once again its not a robot, but you can see the capabilites. Im sure you could put it on a robot for looks.

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: CNC Plasma Cut
« Reply #8 on: July 04, 2007, 08:06:38 PM »
a branding robot  :o
that could come in handy  ;D

is steel soft enough to make a hole in it, and then have a self threading screw go in?
if so then servo mounts might be a hot item
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline QuciferTopic starter

  • Jr. Member
  • **
  • Posts: 13
  • Helpful? 0
Re: CNC Plasma Cut
« Reply #9 on: July 04, 2007, 08:34:39 PM »
Self drilling screws work fine on steel.

 


Get Your Ad Here

data_list