Author Topic: Thought I would share what I am working on now.  (Read 1844 times)

0 Members and 1 Guest are viewing this topic.

Offline DaiboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Thought I would share what I am working on now.
« on: August 13, 2011, 10:49:20 AM »
Robot Head


Controlled by the Axon 2 and 3 servos. I hooked everything thing up just to mess around a bit. Eyelids and a mouth are next, along with a couple of sensors. Alittle bit of redesigning is order too(one eye is just a little taller than the other).
« Last Edit: August 13, 2011, 10:52:11 AM by Daibo »

Offline DaiboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Re: Thought I would share what I am working on now.
« Reply #1 on: August 14, 2011, 06:29:36 PM »


Sporting somes new ears, nose, and stache.

Offline DaiboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Re: Thought I would share what I am working on now.
« Reply #2 on: August 15, 2011, 09:52:33 AM »
930 0280
« Last Edit: August 15, 2011, 09:58:06 AM by Daibo »

Offline Neogs Red

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: Thought I would share what I am working on now.
« Reply #3 on: August 15, 2011, 11:59:31 AM »
thats kinda creepy in a cool kind of way.  ;D

Offline soninja8

  • Robot Overlord
  • ****
  • Posts: 136
  • Helpful? 1
Re: Thought I would share what I am working on now.
« Reply #4 on: August 18, 2011, 09:47:59 PM »
Did autofocus come with your camera lol!  ;)

Offline lrmall01

  • Jr. Member
  • **
  • Posts: 38
  • Helpful? 2
Re: Thought I would share what I am working on now.
« Reply #5 on: August 19, 2011, 11:59:54 AM »
Pretty slick.  How did you achieve the actuation of the mouth?  Are you using a servo to do that?

Nice work!

Offline DaiboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Re: Thought I would share what I am working on now.
« Reply #6 on: August 19, 2011, 04:40:41 PM »
The camera wasn't mine, so I had know idea how to work  :P.

Yes I used servos. 4 Hitec HS-311. Two for the eyes, one for the head swivel, and one for the mouth. For the mouth, I centered the servo-attached a horn at 90 degrees and then with a piece of acrylic attached to that, mounted it to the back of the bottom of the mouth. The servo it self is mount to the back side of plate you can see in the picture.

Offline salama

  • Jr. Member
  • **
  • Posts: 10
  • Helpful? 0
Re: Thought I would share what I am working on now.
« Reply #7 on: November 10, 2011, 12:49:59 AM »
Brilliant. I love it!

 


Get Your Ad Here

data_list