xbee to xbee/ ardiuno problems using x-ctu

[ATRmaker]

Hi
I new at this , but i can't get any communication between by xbee devices
i'm am using ladyada tutorial


The problem is this :
 Action required. Unable to communicate with modem. verify com  port with action below

XBEE:
press and release reset switch.
dialog box should close within 10 seconds

THANKS
FOR ANY HELP

[joe61]

Do you have the right firmware loaded? One of them has to have the controller firmware, and the other the slave. I don't recall the right terms off the top of my head but ...

Joe

[waltr]

Which XBees? There are several hardware modules and protocols.

Give the Series # and the Firmware Version # as reported by the Query command in X-CTU.

[ATRmaker]

Xbee series 1 ,
when i get to test and query it says
Unable to communicate with modem.
due to this i can't get the firmware version

http://www.ladyada.net/make/xbee/configure.html   

[ATRmaker]

I figured out the problem, there was an error with the adapter


Thanks for all your help

[Gertlex]

Thread is useless without what adapter and what the problem with adapter/solution was.