Author Topic: wiper motor  (Read 1779 times)

0 Members and 1 Guest are viewing this topic.

Offline kevinkollinmathewTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
wiper motor
« on: October 02, 2011, 02:02:39 AM »
can i use wiper motors for ma robot?im using 24v dc power supply.i need it to fix my hammer,,which requires high speed and torque.plz help.

Offline Fr0stAngel

  • Full Member
  • ***
  • Posts: 87
  • Helpful? 3
  • [O_O] what??
Re: wiper motor
« Reply #1 on: October 03, 2011, 10:57:13 AM »
most car viper motors are designed to provide torque ,so don't expect speed greater than 100-150 rpm. the best thing to do is to calculate what  torque you need , and what is the momentum of hammer you require, and select a motor accordingly..
'crazy' is the new hype! =)

Offline RITESH29

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
Re: wiper motor
« Reply #2 on: October 05, 2011, 11:14:58 AM »
calculate what  torque you need

Hi,

can you please tell me how to know a\or just calculate it..!!

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: wiper motor
« Reply #3 on: October 05, 2011, 06:15:20 PM »
Hi,

can you please tell me how to know a\or just calculate it..!!
That depends on what you want to do with the torque, but generally, you need to look at what mass you need to move how far (and how fast).
Putting measures on that is the first step.
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline RITESH29

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
Re: wiper motor
« Reply #4 on: October 05, 2011, 09:34:21 PM »
OK, if we want to pick a load of 500gm/.5kg the rpm will be around 10-20..then?

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: wiper motor
« Reply #5 on: October 06, 2011, 10:21:08 AM »
Hi,

OK, if we want to pick a load of 500gm/.5kg the rpm will be around 10-20..then?
500g is your mass, but you need the distance as well to get the torque.

Imagine the arm carrying a 500g load being 10cm vs an arm being 1m - see the difference?

Since torque can exist without movement and you probably want it to have a certain impact, you need the speed as well. That is the RPM, if you're calculating a rotating arm.
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline RITESH29

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
Re: wiper motor
« Reply #6 on: October 06, 2011, 08:58:58 PM »
OK, if the length is 15Cm and RPM can be 30..........

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: wiper motor
« Reply #7 on: October 06, 2011, 10:04:23 PM »
OK, if the length is 15Cm and RPM can be 30..........
For every IF there should be a THEN  ;)

IF (length=15cm) AND (RPM=30) THEN
  what?
ENDIF

Is it how hard a 500g weight will hit or ?? (writing in full sentences helps a lot :))
If so, you need to know how many degrees of swing you'll get before it hits (since you're going to accelerate the thing - it doesn't go 30RPM from the get-go).
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline Fr0stAngel

  • Full Member
  • ***
  • Posts: 87
  • Helpful? 3
  • [O_O] what??
Re: wiper motor
« Reply #8 on: October 06, 2011, 10:46:13 PM »
http://www.societyofrobots.com/mechanics_statics.shtml
instead of asking questions like this, here's ^ a little something called knowledge. with this , you can learn to do it yourself  :o

so basically, read that, and this, http://www.societyofrobots.com/mechanics_dynamics.shtml ,
 and please post here if you don't understand something.  we all would be much happy to help out, but most importantly you could learn, and also help out others .
'crazy' is the new hype! =)

 


Get Your Ad Here

data_list