Author Topic: Dual 24V Scooter Motor chassis help.  (Read 726 times)

0 Members and 1 Guest are viewing this topic.

Offline sptrksTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Dual 24V Scooter Motor chassis help.
« on: October 06, 2011, 11:17:15 AM »
I am working on a robot that will be similar to the size of average combat robots. I am wanting this robot to have the capability of driving outside. I decided to start with the choosing the motors. The motors I chose are 24 Volt 280 W scooter motors. Here are the motors I am using : [url]http://goo.gl/yoF76]http://goo.gl/yoF76] [url]http://goo.gl/yoF76[/url].  I plan on using two of these motors to drive the robot.


My biggest problem with this project is mechanical experience. I need a lot more experience with building chassis for robots. Normally I concentrate on the electronics and programming.

So I just want some general advice and pointers on how I should approach this. Feel free to point me to relevant articles or even just give me your two cents.
« Last Edit: October 06, 2011, 01:12:24 PM by sptrks »

Offline RITESH29

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
Re: Dual 24V Scooter Motor chassis help.
« Reply #1 on: October 06, 2011, 08:50:36 PM »
Your url is not working.......

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Dual 24V Scooter Motor chassis help.
« Reply #2 on: October 06, 2011, 09:49:30 PM »
The link should have been: http://goo.gl/yoF76
But it goes here
« Last Edit: October 06, 2011, 09:52:31 PM by Soeren »
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here

data_list