Tutorial For USB Interface Development board.
USB PROJECT ON PIC18F4550 Microcontroller BEGINNERS:
Microcontroller projects are not like ordinary circuits ( follow schematic and u are done) In case of Microcontroller board there are lots of steps.. Microcontrollers are like Artificial Mind Of a ROBOT.
FIRMWARE AND C# application
Tutorial for making this Board is Lengthy, so i will post the links for making this board.
This a USB Demo Interface Device , that allows me to control 6 led's, i have used a pic18f4550 microcontroller , i have found the schematics and diagrams on microchip.com to make it. I have modified it control 6 led's , it is provides a cool interface to my computer using USB port and leds are controlled with clicks or pressing numpad buttons on my laptop.
It can be used to control various devices , like , Stepper Motor , DC motor , Relay switches etc etc etc.
Download the firmware code ( for 6 - 8 leds) and C# application..
I FOund this Nice Tutorial on a website while i was searching for some tutorial for making this board, i made a robotic arm based on this USB Interface Board, At beginning i thought of using Parallel Port but laptop dont come with laptop , so using a USB port is a cool replacement of parallel or serial port with more better performance
This tutorial is actually not mine but i found it on a website and so sharing with all
UNFORTUNATELY FOR BEGINNERS THE DETAILED INFORMATION AND TUTORIAL STEP STEP CONSTRUCTION CAN BE VERY LENGTHY.
SO I AM GOING TO POST LINKS OF A DETAILED TUTORIALFOLLOW EACH STEPS ONE BY ONE... (for beginners )
1- CIRCUIT CONSTRUCTION
2- FIRST TIME PROGRAMMING
3- Making of JDM PROGRAMMER TO LOAD CODE
4- CONFIG WINPIC 800 with JDM
5- DRIVER INATALLATION for PIC18F4550 board
7- *FIRMWARE TO CONTROL 6 LED in PIC18F4550
8 - ** C# application to control pic18f4550 board DOWNLOAD