Author Topic: TUTORIAL- USB Interface Board - PROJECT on PIC18F4550  (Read 5129 times)

0 Members and 1 Guest are viewing this topic.

Offline rahulverTopic starter

  • Beginner
  • *
  • Posts: 6
  • Helpful? 0
TUTORIAL- USB Interface Board - PROJECT on PIC18F4550
« on: October 06, 2011, 11:01:32 PM »
Tutorial For USB Interface Development board. USB PROJECT ON PIC18F4550 Microcontroller



BEGINNERS: Microcontroller projects  are not like ordinary circuits ( follow schematic and u are done) In case of Microcontroller board there are lots of steps.. Microcontrollers are like Artificial Mind Of a ROBOT.

FIRMWARE AND C# application

USB Demo Interface Development Board (PIC18F4550)


Tutorial for making this Board is Lengthy, so i will post the links for making this board.


This a USB Demo Interface Device , that allows me to control 6 led's, i have used a pic18f4550 microcontroller , i have found the schematics and diagrams on microchip.com to make it. I have modified it control 6 led's , it is provides a cool interface to my computer using USB port and leds are controlled with clicks or pressing numpad buttons on my laptop.

It can be used to control various devices , like , Stepper Motor , DC motor , Relay switches etc etc etc.


Download the  firmware code  ( for 6 - 8 leds) and C# application..

I FOund this Nice Tutorial on a website while i was searching for some tutorial for making this board, i made a robotic arm based on this USB Interface Board,  At beginning i thought of using Parallel Port but laptop dont come with laptop , so using a USB port is a cool replacement of parallel or serial port with more better performance :)

This tutorial is actually not mine but i found it on a website and so sharing with all :)




UNFORTUNATELY FOR BEGINNERS THE DETAILED INFORMATION AND TUTORIAL STEP STEP CONSTRUCTION CAN BE VERY LENGTHY.
SO I AM GOING TO POST LINKS OF A DETAILED TUTORIAL

FOLLOW EACH STEPS :) ONE BY ONE... (for beginners )

1- CIRCUIT CONSTRUCTION -  http://rakeshmandal.info/USB-DEMO-INTERFACE-BOARD-PROJECT.html

2- FIRST TIME PROGRAMMING - http://rakeshmandal.info/microcontroller/first-mircrocontroller-programming.php

3- Making of JDM PROGRAMMER TO LOAD CODE - http://rakeshmandal.info/microcontroller/How-to-make-JDM-Programmer.php

4- CONFIG WINPIC 800 with JDM - http://rakeshmandal.info/microcontroller/winpic800-config-for-JDM-Programmer.php

5- DRIVER INATALLATION for PIC18F4550 board - http://rakeshmandal.info/microcontroller/USB-Interface-Board-Driver-Installation-PIC18F4550.php

6- BOOTLOADING  - http://rakeshmandal.info/microcontroller/BOOTLOADING-PIC18F4550-USB-BOARD.php

7- *FIRMWARE TO CONTROL 6 LED in PIC18F4550 - http://rakeshmandal.info/microcontroller/FIRMWARE-6-LED-CONTROL-PIC18F4550-1.php

8 - ** C# application to control pic18f4550 board DOWNLOAD - http://rakeshmandal.info/CS-Application-To-Control-PIC18F4550-Board-6LED.zip













« Last Edit: October 06, 2011, 11:07:05 PM by rahulver »

Offline rahulverTopic starter

  • Beginner
  • *
  • Posts: 6
  • Helpful? 0
Updated project
« Reply #1 on: June 13, 2013, 08:35:25 PM »

Offline waltr

  • Supreme Robot
  • *****
  • Posts: 1,929
  • Helpful? 98
Re: TUTORIAL- USB Interface Board - PROJECT on PIC18F4550
« Reply #2 on: June 14, 2013, 06:12:04 PM »
Nice. I'll keep this thread in mind for when I try doing a USB PIC.

Offline rahulverTopic starter

  • Beginner
  • *
  • Posts: 6
  • Helpful? 0
Re: TUTORIAL- USB Interface Board - PROJECT on PIC18F4550
« Reply #3 on: August 11, 2013, 03:04:25 PM »
.sure

 


Get Your Ad Here

data_list