go_away

Author Topic: How to connect DC small motor to give o/p of 250-300watt....  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

Offline RITESH29Topic starter

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
How to connect DC small motor to give o/p of 250-300watt....
« on: October 14, 2011, 08:38:44 PM »
Hi, I want to make a manual robot and a person is to be sited on it so required power of motor should be at least 250Watt and the ost of these motor are very expensive in market...
so, please suggest any other method of connecting in such away that overall power will be same by connecting small type of motor....like that.

Thanks

Offline newInRobotics

  • Supreme Robot
  • *****
  • Posts: 1,015
  • Helpful? 48
  • N.I.R.
Re: How to connect DC small motor to give o/p of 250-300watt....
« Reply #1 on: October 15, 2011, 05:21:20 AM »
Hi, I want to make a manual robot and a person is to be sited on it so required power of motor should be at least 250Watt [...]
How do You relate Torque (that defines lifting ability) of the motor with Voltage and Current requirements? Motor with higher Torque can have lower power rating than other motor with lower Torque and vice versa.

so, please suggest any other method of connecting in such away that overall power will be same by connecting small type of motor....like that.
Connecting two motors in parallel to perform same task (two motors spinning one wheel) in theory gives You double the Torque (and double power consumption: 2 x 150W = 300W).
"Computer games don't affect kids; I mean if Pac-Man affected us as kids, we'd all be running around in darkened rooms, munching magic pills and listening to repetitive electronic music." - Kristian W

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: How to connect DC small motor to give o/p of 250-300watt....
« Reply #2 on: October 15, 2011, 06:44:21 AM »
Hi,

"How to connect DC small motor to give o/p of 250-300watt...."
If you need a 250..300W motor, nohing smaller will do. There's no magical way of getting power from nowhere.

I want to make a manual robot and a person is to be sited on it
Sounds like an electric gokart to me?


so required power of motor should be at least 250Watt and the ost of these motor are very expensive in market...
Try eBay or the surplus market.


so, please suggest any other method of connecting in such away that overall power will be same by connecting small type of motor....like that.
Trying to get substantially more power from a small motor will kill it instantly. If it weren't so, there would be no need for large motors and we could drive our cars with pager motors.
IOW, you're busted (by the laws of nature)  ;D
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline RITESH29Topic starter

  • Robot Overlord
  • ****
  • Posts: 152
  • Helpful? 0
Re: How to connect DC small motor to give o/p of 250-300watt....
« Reply #3 on: October 18, 2011, 10:52:16 AM »
Quote
with pager motors

What is this ???

Offline newInRobotics

  • Supreme Robot
  • *****
  • Posts: 1,015
  • Helpful? 48
  • N.I.R.
Re: How to connect DC small motor to give o/p of 250-300watt....
« Reply #4 on: October 18, 2011, 01:35:11 PM »
Quote
with pager motors


What is this ???
Google is Your best friend  ;)
"Computer games don't affect kids; I mean if Pac-Man affected us as kids, we'd all be running around in darkened rooms, munching magic pills and listening to repetitive electronic music." - Kristian W

 


Get Your Ad Here

data_list