Author Topic: help with the $$50$$ dollar robot (Read 575 times)

robotmaniac · « **on:** October 29, 2011, 10:19:17 PM »

guys help please!!!OK here's my thing.I build my PC board checked everything a dozen times.Dismounted everything 3 times. Spent hours looking at the PC Board and diagram.Charged my battery(7.

.checked voltage and resistance.and when i connect it with my AVRISPmkII The light stays red and I get a message that says -Target has lost power, or ISP programmer was disconnected-.whats wrong.

joe61 · « **Reply #1 on:** October 30, 2011, 05:35:14 AM »

i believe that means that the target has not been powered up. You say you've checked the voltage, are you sure it's getting to the ISP connector?

Take a look at the User guide

Joe

robotmaniac · « **Reply #2 on:** October 30, 2011, 08:55:38 PM »

I checked that out and theres no power coming out from the 5V regulator,absolutely nothing so tomorrow I will go to Radioshack and buy a few and another things i need but thank you I will tell you tomorrow what happend

Conscripted · « **Reply #3 on:** October 31, 2011, 10:28:55 AM »

Is your 5 volt regulator in backwards?

robotmaniac · « **Reply #4 on:** October 31, 2011, 04:17:56 PM »

Is not backwards but I decided to built a new one cause the other one was a mess and this one it looks really professional.

robotmaniac · « **Reply #5 on:** October 31, 2011, 06:44:51 PM »

It worked my voltage regulator was broken,and it worked

Conscripted · « **Reply #6 on:** October 31, 2011, 09:03:59 PM »

very nice. Now go and play with it.

Society of Robots - Robot Forum

News:

Author Topic: help with the $$50$$ dollar robot (Read 575 times)

robotmaniac

help with the $$50$$ dollar robot

joe61

Re: help with the $$50$$ dollar robot

robotmaniac

Re: help with the $$50$$ dollar robot

Conscripted

Re: help with the $$50$$ dollar robot

robotmaniac

Re: help with the $$50$$ dollar robot

robotmaniac

Re: help with the $$50$$ dollar robot

Conscripted

Re: help with the $$50$$ dollar robot

Related Topics