Author Topic: Help with pop can vending computer  (Read 915 times)

0 Members and 1 Guest are viewing this topic.

Offline Coltstech15Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Help with pop can vending computer
« on: April 26, 2012, 04:51:57 PM »
Hi I'm new here and would like some help. I decided to make a spin off of this fridge like computer( http://www.inventgeek.com/Projects/Minifridge/OverView.aspx ) and wish to make it be servo controlled and a belt of some sort to take the can from the bottom up to a addition of the top that lets the can roll and be ready for me to grab.  Any help with how to get the belt or another way for the cold can to move vertical. Can contact me by e-mail. [email protected]

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Help with pop can vending computer
« Reply #1 on: April 26, 2012, 09:29:18 PM »
Hi I'm new here [...] Any help with [...] Can contact me by e-mail.
Main rule on ANY forum I know is...
Questions asked here is answered here - asking for email consultancy is downright egoistic, as it voids others of the possible answers.

Besides... only cool your beverage if you don't like the taste ;)

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives


Get Your Ad Here