Author Topic: Building Biped Robot - controller suggestions?  (Read 587 times)

0 Members and 1 Guest are viewing this topic.

Offline freedman775Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Building Biped Robot - controller suggestions?
« on: August 16, 2012, 10:08:36 AM »
Hi guys!

So I am doing research on Bipedal robots. I am in the engineering phase and having some difficulty. I am working with the Robovie-M v.3 (See robot here: http://www.robotadvice.com/vstone-robovie-m2-v3_robot.html). It is quite old and outdated and I am going to have to replace some parts (controller/power supply). But I am keeping the 22 servo motors that came with it. I am not all that knowleagable with the hardware involved so any help on what parts I should look at would be greatly appreciated.

Thanks!

P.S. If I left out important details just let me know and I will do my best to give whatever further information is needed!


Offline Z4856

  • Beginner
  • *
  • Posts: 6
  • Helpful? 0
Re: Building Biped Robot - controller suggestions?
« Reply #1 on: August 17, 2012, 06:44:08 PM »
I would recommend using the axon because it has lots output pins for the motors that you will need. also its small and light perfect for walking robots.

 


Get Your Ad Here

data_list