go_away

Author Topic: PICS With more then 1 serial line??  (Read 1481 times)

0 Members and 1 Guest are viewing this topic.

Offline Robotboy86Topic starter

  • Robot Overlord
  • ****
  • Posts: 139
  • Helpful? 0
PICS With more then 1 serial line??
« on: July 28, 2007, 06:21:54 PM »
The basic only has 1 serial line, i am looking for a pic that can use two ones...


Any ideas?

Offline dunk

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 1,086
  • Helpful? 21
Re: PICS With more then 1 serial line??
« Reply #1 on: July 29, 2007, 03:53:56 AM »
if you want to know about PICs specifications, look at the manufacturers web site.
that's http://microchip.com for PICs.
check the links form this page:
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=74

dunk.

Offline Dosbomber

  • Jr. Member
  • **
  • Posts: 33
  • Helpful? 0
Re: PICS With more then 1 serial line??
« Reply #2 on: July 29, 2007, 01:22:25 PM »
Only one serial line?

Not sure what you're talking about.  In a previous project, I used a PIC16F628 with two pairs of serial lines as a sort of translator between 9600 and 2400 baud, and I had no problems at all.  One pin for 9600 in, one for 9600 out, one for 2400 in, one for 2400 out.

Actually, now that I think about it, I used another one for 9600 out to a serial LCD for monitoring purposes as well.
Dosbomber

Offline Robotboy86Topic starter

  • Robot Overlord
  • ****
  • Posts: 139
  • Helpful? 0
Re: PICS With more then 1 serial line??
« Reply #3 on: July 29, 2007, 07:10:07 PM »
More then 1 set of duplex lines..


IE two or three lines and such.   but I will look at that.

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,663
  • Helpful? 169
    • Society of Robots
Re: PICS With more then 1 serial line??
« Reply #4 on: July 31, 2007, 06:55:33 AM »
Some AVR's have multiple UART (serial) lines . . . if you are willing to convert over :P

 


Get Your Ad Here

data_list