go_away

Author Topic: $50 robot servo hold  (Read 556 times)

0 Members and 1 Guest are viewing this topic.

Offline Ledhed66Topic starter

  • Beginner
  • *
  • Posts: 5
  • Helpful? 0
$50 robot servo hold
« on: February 26, 2013, 12:22:16 AM »
I have been working on the $50 robot with my  13 year old son for a science project for school. He has done most of the soldering himself and has been very excited about what he has learned to this point. We are having trouble with the servo holding to modify. I have read several posts and answered several of my questions. But I can't seem to get the .hex file to load properly. We are very new to robotics and have enjoyed working on this together, so if anyone has an answer please understand we are "Very New" and need simple intructions. I have attached a screen shot of the error I receive. Thanks in advance for your help

Offline Ledhed66Topic starter

  • Beginner
  • *
  • Posts: 5
  • Helpful? 0
Re: $50 robot servo hold
« Reply #1 on: February 26, 2013, 04:39:30 PM »
After doing some more research I was able to discover that I had the AVR Studio set to ATmega168 instead of ATmega8. 

 


Get Your Ad Here

data_list