go_away

Author Topic: Re: Powering a continuously rotating servo.  (Read 572 times)

0 Members and 1 Guest are viewing this topic.

Offline AzraelsTopic starter

  • Full Member
  • ***
  • Posts: 57
  • Helpful? 1
Re: Powering a continuously rotating servo.
« on: April 12, 2013, 07:34:01 PM »
A servo also has position control built in, that is why you cannot just hook up to battery. Note the three wires. One is for the position control. A 555 timer is probably the simplest way to do this,
Go to this page: http://www.beam-wiki.org/wiki/555_Servo_Controller
or google 555 servo control
If your first post is, "I want to build a super complex robot with object recognition, etc..but I have never done programming or electronics...etc." 
Your doing it wrong. Start Simple and Work Up.

Offline AzraelsTopic starter

  • Full Member
  • ***
  • Posts: 57
  • Helpful? 1
Re: Powering a continuously rotating servo.
« Reply #1 on: April 12, 2013, 07:37:34 PM »
Not sure why this did not post in the right place.  :-\
My computers drunk.
If your first post is, "I want to build a super complex robot with object recognition, etc..but I have never done programming or electronics...etc." 
Your doing it wrong. Start Simple and Work Up.

 


Get Your Ad Here

data_list