Mechanics and Construction > Mechanics and Construction

First attempt at a robotic arm! Suggestions for base?

<< < (2/2)

Arduino02:
you need to add gaskets on legs and tops of all five screws, tie them up with nuts for both sides of board, cause area of thrust surface is too small.

also there is other option, there is a 6-dof robot arm chassis robot arm support turnplate for your reference, here is the link:
http://www.mhobbies.com/6-dof-robot-arm-chassis-robot-arm-support-turnplate.html

Bciaren:
Thanks for the help guys!  I used a lazy Susan bearing and it worked out like a charm!



Now the next step is to put a gripper together!  Anyone know of any companies that deal in gears? I find myself having a difficult time finding 1" diameter 64 pitch gears anywhere in NYC!  NYC seems to be anti hobby really..

jwatte:
Gears places:
sdi-sp.com
rapidgears.com
mcmaster.com

Or hob your own :-)

Navigation

[0] Message Index

[*] Previous page

Go to full version