what's the plan for controlling it?
briselec, it has a few different control option. 1) Manual Joystick, 2) FPV, 3) G Code(CNC Mode).
How will it know where to mow?
It has to be programmed in G-Code(non-standard format)
I use notepad to write and edit codes.
the line "Q45 C180 F30" tell it to turn 45deg using the Q axis until the compass reaches 180deg at 30% velocity.
the next line could be "C180 X320.5 F70" which tells it to hold a compass heading of 180deg until the X axis
reaches 320.5feet at a velocity of 70%.
Until I get the beacons working I have to start the program in the same spot each time.
picture below is FPV mode example