Author Topic: Replacement ATMEGA8 for $50 robot  (Read 460 times)

0 Members and 1 Guest are viewing this topic.

Offline SabetnielTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Replacement ATMEGA8 for $50 robot
« on: September 17, 2013, 09:43:42 AM »
Hello everyone.
To construct the robot $ 50 atmega8 is required, however do not get this micro. What would be the recommended micro without changing programming software?
The atmega328 can be used?

Offline jkerns

  • Robot Overlord
  • ****
  • Posts: 251
  • Helpful? 12
Re: Replacement ATMEGA8 for $50 robot
« Reply #1 on: September 17, 2013, 10:48:13 AM »
Pretty much.

You will have to check the exact register names and compare - I have seen differences between other similar AVR chips.  Usually not that hard to fix given a data sheet.  Things like timer masks and PWM setup bits are likely to change.
I get paid to play with robots - can't beat that with a stick.

http://www.ltu.edu/engineering/mechanical/bachelor-science-robotics-engineering.asp

Offline SabetnielTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: Replacement ATMEGA8 for $50 robot
« Reply #2 on: September 19, 2013, 03:41:47 PM »
Done, thank you very much. I'll try to get otherwise atmega8 studying for change that micro....

 


Get Your Ad Here